Product Information
SPRAY ADHESIVE MEGATAC 500ML CLEAR SUPER HIGH STRENGTH
Megatac spray adhesive is designed to hold fabrics (glass, aramid, carbon, or peel ply fabrics) in place during lamination. Megatac’s strong adhesion also allows the placement of heavy reinforcements and cores (foam, balsa, etc.). Megatac does not interfere with the curing of resins (epoxy, polyester, vinyl ester).
Usage
- Shake well before use. Operating temperature: 15°C–40°C
- Ensure that the surface is clean, dry, and free of contaminants.
- Set the nozzle to L (low), M (medium), or H (high) to adjust the spray flow.
- Spray a thin layer of adhesive onto the surface to be bonded from a distance of 15–20 cm.
- Allow to dry for 10 seconds, until the adhesive appears slightly tacky. Then, apply the fabric onto the adhesive-coated surface.
Hazard statements
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long-lasting effects.