Product Description
SPRAY ADHESIVE INFUTAC, NORMAL, 500 ML 360 G GREEN
Infutac spray adhesive is designed to hold fabrics (glass, aramid, carbon, or peel ply fabrics) in place during lamination. Infutac does not interfere with the curing of resins (epoxy, polyester, vinyl ester).
Usage
- Shake well before use. Operating temperature: 15°C–40°C
- Ensure the surface is clean, dry, and free from contaminants.
- Set the nozzle to L (low), M (medium), or H (high) to adjust the spray flow.
- Spray a thin layer of adhesive onto the surface to be bonded from a distance of 15–20 cm.
- Allow to dry for 10 seconds, until the adhesive appears slightly tacky. Then, apply the fabric onto the adhesive-coated surface.
Hazard statements
H222 Extremely flammable aerosol.
H229 Pressurized container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long-lasting effects.