Default EUR pricelist
  1. All Products
  2. POLYESTER RESIN AROPOL M 105 TB 3 KG

POLYESTER RESIN AROPOL M 105 TB 3 KG

https://kevytrakentajanverkkokauppa.fi/web/image/product.template/1857/image_1920?unique=055e143
(0 review)

Polyesterihartsi lasikuituosien valmistukseen ja korjaukseen. Hartsi sopii veneisiin, autoalan korjaus- ja rakennustöihin, muottitöihin sekä komposiittirakenteisiin.  

Hardener sold separately, Hardener MEK-50

41.80 € 41.800000000000004 EUR 41.80 € VAT Included

(41.80 € / Units)

30 days lowest price 1.56

This combination does not exist.

Contact Us


Safety​Product Information

Product Information

POLYESTER RESIN AROPOL M 105 TB 3 KG

AROPOL M 105 TB is a thixotropic and pre-accelerated polyester resin, suitable for both spray and hand lamination. The resin offers a reliable medium setting time (approx. 40 min with 1% hardener) and enables the production of 2–10 mm laminates. The resin is also suitable for the production of sludge tanks, for example.

Hartsiosa, travitsee 1 – 2 % MEK-50 kovetetta (metyylietyyliketoniperoksidi).

3 kg hartsiosa tarvitsee 30 – 60 g MEK- 50.

Applications

AROPOL M 105 TB is suitable for the production of various types of fiber-reinforced plastic components and is particularly recommended for use in boat manufacturing.

​

Safety

Before handling topcoat, ALWAYS ensure good ventilation and skin protection. Wear a long-sleeved shirt and disposable gloves resistant to topcoat (e.g., nitrile rubber). Uncured epoxy resin is highly sensitizing to the skin. 

Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Suspected of damaging the unborn child. May cause damage to organs (hearing organs) through prolonged or repeated exposure. Harmful to aquatic life with long-lasting effects.

Tekniset tiedot

 

Safety


Before working with epoxy, ALWAYS ensure good ventilation and proper skin protection. Wear a long-sleeved shirt and disposable gloves that are resistant to epoxy (e.g. nitrile rubber). Uncured epoxy resin is a strong skin sensitizer. A suitable respirator for epoxy handling should be certified according to EN405. Fully cured epoxy is not hazardous to health.​

Tools can be cleaned with acetone, but keep in mind that epoxy is a very strong adhesive and sticks to almost anything—including your tools. Therefore, it’s best to use inexpensive tools that can be discarded after use.​

AMPRO™ 115 epoxy resin: H315 Causes skin irritation; H317 May cause an allergic skin reaction; H318 Causes serious eye damage; H319 Causes serious eye irritation; H411 Toxic to aquatic life with long-lasting effects; P261 Avoid breathing vapour; P264 Wash hands thoroughly after handling; P272 Contaminated work clothing should not be taken off-site; P273 Avoid release to the environment; P280 Wear eye protection, protective clothing, protective gloves; P302+P352 IF ON SKIN: Wash with plenty of water and soap.​

AMPRO™ 115 hardener: H302 Harmful if swallowed; H314 Causes severe skin burns and eye damage; H317 May cause an allergic skin reaction; H412 Harmful to aquatic life with long-lasting effects; P260 Do not breathe vapour; P264 Wash hands thoroughly after handling; P270 Do not eat, drink or smoke when using this product; P272 Contaminated work clothing should not be taken off-site; P273 Avoid release to the environment; P280 Wear protective gloves, protective clothing, eye protection.​

 


Products in our selection

Dynaaminen pätkäsi näytetään tässä... Tämä viesti näytetään, koska et ole antanut sekä suodatinta että mallia käytettäväksi.