Product Information
GELCOAT WHITE 1 KG
Gelcoat provides a protective and finished surface for fiber-reinforced plastic products. It is a high-quality, pre-accelerated polyester-based gelcoat with good chemical and heat resistance. It can be used with both vinyl ester and polyester resins. It is applied to the mold or onto the finished product before laminating and cured with peroxide.
The correct application thickness and proper curing of gelcoat are essential for a durable and aesthetically pleasing result. It is typically applied with a brush or spray gun at a layer thickness of about 0.4–0.6 mm. A layer that is too thin may crack, while one that is too thick may shrink or sag.
Resin component requires 1–2% MEK-50 hardener (methyl ethyl ketone peroxide).
Gel time with 1.5% hardener (20 °C): 6–21 min
1 kg of resin component requires 10 – 20 g of MEK- 50 hardener.
The white shade is a pure, non-tinted white.
Safety
Before handling gelcoat, ALWAYS ensure good ventilation and skin protection. Wear a long-sleeved shirt and disposable gloves resistant to gelcoat (e.g., nitrile rubber). Uncured epoxy resin is highly sensitizing to the skin.
Flammable liquid and vapor. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation. Suspected of damaging the unborn child. May cause damage to organs (hearing organs) through prolonged or repeated exposure. Harmful to aquatic life with long-lasting effects.