Product Information
SPRAY ADHESIVE FOGTAC 500 ML 12 KPL/LTK
Fogtac spray adhesive is designed to keep fabrics (glass, aramid, carbon, or peel ply fabrics) in place during lamination. Fogtac does not interfere with the curing of resins (epoxy, polyester, vinyl ester). The adhesive is applied as a fine mist from the can. Its bonding strength is between that of Infutac and Megutac.
Usage
- Shake well before use. Operating temperature: 15°C– 40°C
- Ensure that the surface is clean, dry, and free of contaminants.
- Set the nozzle to L (low), M (medium), or H (high) to adjust the spray flow.
- Spray a thin layer of adhesive onto the surface to be bonded from a distance of 15–20 cm.
- Allow to dry for 10 seconds, until the adhesive appears slightly tacky. Then, apply the fabric onto the adhesive-coated surface.
Safety
Extremely flammable aerosol. Pressurized container: May burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness and dizziness. Harmful to aquatic life with long-lasting effects.